ffd

As previously mentioned (http://www.blogspot.com/2016/09/200000-views-ithaca-arm-and-dmips.html) I’m doing an independent study under the supervision of Professor Bruce Land here at Cornell University. A semester has passed and I will be continuing my independent study next semester. The independent study (that I'm doing and will be continuing) is on exploring and comparing the peripheral modules of the Microchip PIC32MX250F128B (on the Microstick II platform) and the Atmel AT91SAM3X8E (on the Arduino Due platform). This semester, I've done a good amount of introductory exploration of the two 32-bit microcontrollers. Here are the links to the datasheets of the two microcontrollers on which my independent study is based: AT91SAM3X8E: www.atmel.com/Images/doc11057.pdf PIC32MX250F128B: http://ww1.microchip.com/downloads/en/DeviceDoc/61168E.pdf The Microchip PIC32MX250F128B is a 32-bit RISC microcontroller based on the MIPS M4K core. In this independent study, I have used the Micro...

Before performing any communication, it is better to understand the hardware interface of Delta Hmi TP04 series and how to set the communication settings in TPEditor software program. Please refer to the following sections for the method of communication. An external 24V DC power is required when activating TP04 series. After the power is in connected to TP04 series, the start-up display will show up first and then the system main menu of TP04 series will appear. Choose “4.TP SETUP” > “1.Communication Protocol”. There are three items regarding the communication settings: TP Settings: It is used to set the communication address of TP series. RS232: It is used to set the transmission speed (baud rate), data length, parity check, and stop bit of     RS-232 communication. RS485: It is used to set the transmission speed (baud rate), data length, parity check, and stop bit of RS-485 communication. The above three items should be set in accordance with the settings set in T...