PRECAUTIONS FOR CHECKING BEAM EMISSION The laser beam of this unit is focused on the reflecting surface of the objective lens in the optical system block. Therefore, keep your eyes at least 12 inches (30 cm) away from the objective lens when the laser diode is ON. (Operation Check Method for Laser Diode and Focus Search Function.) When the POWER switch is turned ON after the chucking plate is removed, observe the objective lens and confirm that the following operations are performed properly. (The optical system should be at the lead-in area position when it is checked at this time.) (1) The laser should be at the innermost position after the chucking plate is removed. (2) The diffused light of the laser beam can be seen when the POWER switch is turned ON. (3) Vertical (up and down) movement of the objective lens (2 or 3 times) will take place. Click on the pictures to magnify Main board MCU Display RF amplifier Amplifier Power Wiring Exploded view When removing the pi...