ffd

Easy Downloader Circuit Atmel microcontroller series AT89Cxx51 Easy Downloader is one of the downloader that is often used to write data to program the Atmel microcontroller AT89CXX51. Easy Downloader AT89Cxx51 ATMEL microcontroller is using the serial port as a channel of communication with the computer.  Easy Downloader ATMEL Microcontroller AT89Cxx51 can be used to program Atmel AT89CXX51 in parallel. Atmel microcontroller series AT89Cxx51 Easy Downloader is quite simple to make your own because the components necessary to membutanya not complex. Atmel microcontroller series AT89Cxx51 Easy Downloader do not support the serial programming microcontrollers ISP. In the article Easy Downloader ATMEL Microcontroller AT89Cxx51 only displays images Easy Downloader Microcontroller series from Atmel AT89Cxx51 only and are simple.

A very easy build Electronic Project of dual polarity power supply circuit, requires few parts, and is adjustable from 0-15 volts. It is great for powering op amp circuits, as well as other circuits that require a dual supply voltage. Dual Polarity Power Supply Circuit Diagram: Parts List: C1, C2 2200uF 35V Electrolytic Capacitor C3, C4, C5, C7 1uF 35V Electrolytic Capacitor C6, C8 100uF 35V Electrolytic Capacitor R1, R4 5K Pot R2, R3 240 Ohm 1/4 W Resistor BR1 2A 30V Bridge Rectifier U1 LM317 Adjustable Positive Regulator U2 LM337 Adjustable Negative Regulator T1 30V Center Tapped 2 Amp Transformer S1 SPST 2 Amp Switch MISC Heatsinks For U1 And U2, Line Cord, Case, Knobs For Pots, Wire Notes: Since this project operates from 120 (or 220, or 240, etc.) volts AC, it MUST be built inside a case. U1 and U2 get quite hot and will require heatsinks. A fan is usually not needed. You can, of course, add a volt and amp meter. U1 and U2 can only go down to a minimum of +-1.2V. If you need to g...

The project is a user-friendly and cheap FM radio receiver which produces the desired audio signals using integrated circuit to achieve the pre-processing units. During operation, the user is allowed to change stations and interact with the receiver by integrating a keypad and an LCD for communication. There are several functions that this radio receiver can perform including adjusting the threshold when picking up stronger or weaker stations, setting up 3 favorite stations for quick tuning, scanning up/down for next strong signal station, and tuning up/down a frequency. A keypad is designed for controlling the receiver and the buttons are mapped to their corresponding functionality while the other buttons are not connected. The 4 main sub-components of the receiver include the LCD, the keypad, the favorite station storage, and the communication with receiver. Each of them is being controlled by their software components. The antenna transfers the incoming radio signal to the AR1010 F...