ffd

A different Electronic Security Door Key Circuit Diagram of electronic lock very simple, one and does not need a lot of materials in order to it is manufactured. The right keys of code should be stepped with the right line, so that is activated the optocupler IC2. If from error is stepped switch that does not belong in the combination, then the lock is trapped. In order to we restore the regular operation of lock, it should we press switches S1 or S12.   Electronic Security Door Key Circuit Diagram Switch S1 makes Reset of lock externally and the S12 internally, the door. The Code the circuit as he is connected it is 147 and it can change, very easily, changing the connections in the switches of keyboard. The optocupler IC2, can drive any exterior circuit as Relay etc, ensuring simultaneously electric isolation the two circuits. The circuit can be also supplied from a battery 9V. Part List     R1-7-9=1Kohm     R2-3-4-5=100Kohm     ...

Here i am presenting you a Fingerprint based security system using r303a module . By using this you can secure a room, office, lockers or any private areas. The basic principle used in this project is Biometric Authentication, it refers to the identification of humans by their physical or behavioural characteristics. The physical biometric authentication involves FINGERPRINT VOICE FACE IRIS Here we are using fingerprint as the identification factor, for that a fingerprint module R303 is used. it is a low cost, high performance, easily available one and can be able to store upto 120 fingerprint images in its memory. We can also interface it with a computer by means of max232 level converter. The fingerprint module R303 can be divided into two sections Read More.....

This doorbell system works such that when someone presses your calling bell switch during the night, not only the bell rings but the bulb connected to it also glows. In order to turn the bulb off, just press the reset pushbutton switch provided in the circuit. Place the bulb near the calling bell switch so that you can see the person pressing the calling bell before opening the door. So you can choose not to open the door to doubtful persons. During day time, the bulb doesn’t glow and only the calling bell sounds.  Doorbell with Security Feature Circuit Diagram When calling bell switch S1 is closed, the bell rings and simultaneously transformer X gets AC supply. The output of this 6V-0V-6V/500mA step-down transformer is rectified by diodes D1 and D2. The rectified output is filtered by 1000µF, 25V capacitor C1 and fed to the collector of transistor BC547 (T1) via 2.2k resistor R1. A light-dependent resistor (LDR) is connected to the base of this transistor. During the day, the LDR ...